一、 產品介紹
GUR-7605是銅化物的系列產品，本品是一款成熟的 PA高性能熱穩定母料又稱有機銅鹽母粒，主要成分為銅化物及有關輔助助劑。產品外觀呈本白色，適合顏色要求高的產品。
二、 產品特點
GUR-7605是一種特別有效果的熱穩定母粒，銅化物作為熱穩定抑制劑，特別是在高溫范圍內（180度左右）能起到明顯效果。PA制品加入本品在高溫環境下不降解、機械性能、無潤滑摩擦（不會折出在制品表面，制品表面可長期保持光澤）和較好的耐腐蝕性能基本不變。本品加入 PA制品中染色無改變。這些改良的性能不僅在未增強型尼龍中有效，而且在增強尼龍中同樣有效。特別是玻纖增強尼龍更明顯。
本產品優點：
1)高性價比的產品，使尼龍長期在高工作溫度下，提供顯著 的長效穩定性，以抵抗尼龍變脆
2)強效保護，防止尼龍?jiān)诟邷亍⒒瘜W(xué)腐蝕以及惡劣的環境條件下產生過早的機械疲勞。
三、 作用機理
針對銅化物，聚酰胺來說是一種的熱穩定劑，銅化物在尼龍中呈分子狀分散于尼龍中形成一種聚合物使尼龍?jiān)诟邷丨h(huán)境下不降解，保持其機械性能。
四、 產品應用
本產品在汽車的水室汽室產品、三層絕緣線、齒輪等尼龍產品可以廣泛應用。
五、 使用方法
GUR-7605高性能熱穩定母粒的添加量一般 2-5％，具體添加量取決于聚合物的種類和最終制品想要達到的效果。
六、 技術指示
外觀∶綠色顆粒。特別說明：（本產品可做淺色制品不影響產品本色）主成份∶銅化物及輔助助劑
熔點∶大于 120度
密度∶1.16
七、 包裝與儲存
采用塑紙復合袋，25Kg/袋，并可根據用戶要求，按一般化學品儲存于干燥環境中。除有特殊說明，產品在合理儲存條件下為 24個月。
1、 Product Introduction
GUR-7605 is a series of products of copper compounds. This product is a mature PA high-performance heat stable masterbatch, also known as organic copper salt masterbatch, mainly composed of copper compounds and related auxiliary additives. The product has a natural white appearance, suitable for products with high color requirements.
2、 Product Features
GUR-7605 is a particularly effective thermal stability masterbatch, with copper compounds serving as thermal stability inhibitors, especially in the high temperature range (around 180 degrees), which can have a significant effect. PA products added to this product in high-temperature environments
Non degradable, mechanical properties, non lubricating friction (will not fold out on the surface of the product, and the surface of the product can maintain luster for a long time), and good corrosion resistance remain basically unchanged. This product has no change in dyeing when added to PA products. this
Some improved properties are not only effective in unreinforced nylon, but also in reinforced nylon. Especially fiberglass reinforced nylon is more obvious.
Advantages of this product:
1) High cost performance products provide significant long-term stability of nylon under high operating temperatures to resist nylon embrittlement
2) Strong protection to prevent premature mechanical fatigue of nylon under high temperatures, chemical corrosion, and harsh environmental conditions.
3、 Mechanism of action
For copper compounds, polyamide is a special heat stabilizer. Copper compounds are dispersed in nylon in molecular form, forming a polymer that does not degrade nylon in high-temperature environments and maintains its mechanical properties.
4、 Product Application
This product can be widely used in nylon products such as water chamber and steam chamber products, three-layer insulation wires, and gears in automobiles.
5、 Usage method
The addition amount of GUR-7605 high-performance thermal stability masterbatch is generally 2-5%, depending on the type of polymer and the desired effect of the final product.
6、 Technical instructions
Appearance: Green particles. Special note: (This product can be used as a light colored product without affecting its natural color) Main ingredients: copper compounds and auxiliary additives
Melting point: greater than 120 degrees
Density: 1.16
7、 Packaging and Storage
We use plastic paper composite bags, 25Kg/bag, and can store general chemicals in a dry environment according to user requirements. Unless otherwise specified, the product is stored under reasonable conditions for 24 months.
